The SL-120 dry ice block press is an efficient and reliable unit, and proper use ensures stable operation and a long service life. Let’s see how to use this machine correctly below.
Learn about its construction
Before operating the dry ice block maker machine , you need to know what each part of the machine is composed of, what is its role, the following is the structure of the dry ice machine diagram for your reference and study:
Operation instruction of SL-120 dry ice block machine
Then let’s see how to correctly use the dry ice block press:
Step 1: Place the machine
Place the equipment in a ventilated area (open windows and doors to ventilate when producing dry ice); place the equipment horizontally.
Step 2: Add hydraulic oil
Open the left door, and add hydraulic oil (No. 46) to the oil tank, the oil level is around 70-80C on the level gauge.
Step 3: Wiring
Connect the external power cord of the device to a three-phase 5-wire (380V/3P/50Hz), and the power cord has a total of 5 core wires; live wire: L1 (red), L2 (black), L3 (blue), neutral wire (green), ground wire (yellow).
Step 4：Trun on the machine
- Turn on the power switch, enter the touch screen and click ENTER;
- Enter the home operation interface, click “Manual” and “Operation button”;
- Enter the manual page, and click “Start the motor”, after the motor starts, open the left door to see if the fan blade at the rear of the motor rotates clockwise.
Step 5: Connect with CO2 gas cylinder
Connect one end of the bellows to the liquid phase outlet of the gas cylinder, and the other end to the carbon dioxide inlet position of the equipment.
Step 6: Start dry ice block production
Enter the touch screen; click the “start button”; the device enters and starts running.
Step 7: Adjust dry ice block parameters
Adjust the weight of each piece of dry ice and the ice spraying time.
Step 8: End the work
First, close the valve in the external gas cylinder; after entering the “close button” on the touch screen, the device will run twice and then shut down the power supply.
Open the exhaust valve at the rear of the equipment, the work is completed.
